100Khz Custom Line Spray Nozzle Nano Film Thickness Ultrasonic Coating Instrument FS150
Description:
The 100Khz customized line spray nozzle nano film thickness ultrasonic coating instrument FS150 is a device that uses ultrasonic high-frequency vibration technology for spraying. It is mainly developed for enterprises, high-efficiency, and research institutes that are new to ultrasonic spraying equipment.
During the spraying process, different frequencies of ultrasonic waves have different effects on the dispersion and spraying effect of the coating. FUNSONIC provides 25kHz to 200Khz ultrasonic nozzles for customers to choose. In the actual operation process, the amplitude of the power supply is adjusted according to the atomization effect and coating quality of the coating to reach the critical value of atomization, so as to achieve higher roundness of the atomized particle size of the coating.
Parameters:
| Product Type | Ultrasonic Precision Spraying Coated Machine Laboratory desktop Type FS150 |
| Spray Nozzle Operating Frequency | 20-200KHz |
| Nozzle Power | 1-15W |
| Continuous Spraying Volume Max | 0.01-50ml/min |
| Effective Spraying Width | 2-100mm |
| Spray Uniformity | ≥95% |
| Solution Conversion Rate | ≥95% |
| Dry Film Thickness | 20nm-100μm |
| Solution Viscosity | ≤30cps |
| Temperature Range | 1-60℃ |
| Atomized Particles (Median Value) | 10-45μm (distilled water), determined by the frequency of the nozzle |
| Diversion Pressure Max | ≤0.10MPA |
| Input Voltage | 220V±10%/50-60Hz |
| Exercise Mode | X. Y-axis and Z-axis linear track motion module, performing up and down/front and back/left and right movements |
| Motion controller | Operating software system, parameter settings |
| Control Content | Ultrasonic spraying, liquid supply, heating, ultrasonic dispersion and other systems |
| Liquid Supply Method | Precision injection pump |
| Ultrasonic Dispersion System (Optional) | 50ml, 40K, biological grade sampler |
| Rated Power of Ultrasonic Dispersion System | 200W,10A |
Coating Viscosity Factor :
When using an ultrasonic coating machine, different viscosity coatings need to adjust coating parameters to ensure coating quality:
1. Low viscosity of coatings (such as water-based coatings)
Ultrasonic frequency: Higher frequencies can be selected to improve atomization effect and form finer coatings.
Power: Moderately increase the power to ensure that the coating can be effectively atomized.
Coating speed: The coating speed can be appropriately increased to complete the coating in a shorter time.
Pulse time: Shorten the pulse time to keep away from immoderate deposition of paint.
2. Medium viscosity coating (such as established oil-based coatings)
Ultrasonic frequency: Choose a medium frequency to stability atomization impact and coating adhesion.
Power: Maintain at a moderate level to ensure even coating application.
Coating speed: Adjust moderately according to the actual situation, usually maintaining a moderate speed.
Pulse time: Adjust according to the coating thickness requirements and extend moderately to ensure sufficient coverage.
3. High viscosity of coatings (such as heavy coatings)
Ultrasonic frequency: Choose a lower frequency to enhance the atomization effect of the coating.
Power: Increase the power appropriately to ensure effective atomization of coatings with higher viscosity.
Coating speed: Reduce the coating pace to make certain uniform insurance and reap the favored thickness of the coating.
Pulse time: Extend the pulse time so that the coating can be thoroughly launched and evenly applied.
100Khz Custom Line Spray Nozzle Nano Film Thickness Ultrasonic Coating Instrument FS150
Product Tags:
|
|
100Khz Custom Line Spray Nozzle Nano Film Thickness Ultrasonic Coating Instrument FS150 Images
|
